HC818K1 (to connect with a one-way switch)

Bointec HC818K1/2/3 is a smart light controller to be installed between lamps and traditional on/off switch(es), in order to allow lamp to be controlled by WiFi radio.

Using by cutting edge Internet of Thing technologies, Bointec HC818K1/2/3 build-in WiFi radio TX/RX module and microprocessor. With the powerful hardware platform, HC818K1/2/3 could translate BLCP® (Bointec Light Control Protocol) command flow to instruct the connected lamp/bulb to perform on or off. With an Apple® or an Android® smart device by download Bointec netREMOCON® App, it allows you to control the lamp on/off status without walk close to the traditional ON/OFF switch that is on the wall. You can now turn on and off the lamp with a long distance, up to 300 meters away. Accordingly, you could know if the lamp is on or off without walk into the room by look at the lamp status on the smart device. 

Imaging how simple 1-2-3 it is, just: 1. install HD818K1/2/3 by a technician to attach the lamp you like to control, 2. install netREMOCON® App in the smart device on your hand, and 3.run Instant Scan® from netREMOCON®. Then, you have finished the setup procedure and start to enjoy the convenience. Moreover, with multiple smart devices, you could have multiple control outlets at a same time. With all of them precisely show the lamp on/off status.